Motul 300V 10w40 is a top of the line synthetic engine oil from Motul there is no other oil which comes close to its performance in India. 

    The oil has proprietary Double Ester-Technology which ensure excellent oil penetration and protection. Oil is suitable for Kawasaki, Suzuki, Honda and TVS engines. The difference the oil makes is bigger smile on the riders face, smoother gear shifts, higher RPM range and a tendency to drive at higher speed than usual. It’s a fully synthetic imported oil from France. It exceed OEM specifications. Oil last 5000-7500 kms on an average. 

        Type of use: Race bikes fitted with high performance 4 stroke engines, integrated gearbox or not, wet or dry clutch, race engines, qualifying engines designed to run low viscosity oil: speed bikes, MotoGP, SuperSport, Superbike, uphill, hill climb … Other uses: street bikes fitted with catalytic converters, ATV’s, UTV’s 

        Performance Standards: Above existing standards,  Wet clutch compatibility checked on JASO T903 test. 

        Ester Core Technology: For decades MOTUL has developed high performance synthetic Ester based lubricants. By selecting esters over other high performance synthetic base stocks and combining them with an innovative additive package, MOTUL has created a perfect synergy. This most advanced E Technology allows maximum power output of the engine without compromising reliability and wear. - Up to 1.3% horsepower increase while maintaining wet clutch performance. Outstanding gearbox protection: Thanks to the innovative anti-wear additives package. FZG Gear Test results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS 14 (outstanding result). - Stable oil pressure whatever running conditions. 

        Recommendations: For optimum engine and gearbox performance, avoid mixing with other synthetic or mineral lubricants. Oil change: according to your own use. 

        Properties:

Color Visual Yellow / Green Fluo

        Viscosity grade SAE J 300 10W-40

        Density at 20°C (68°F) ASTM D1298 0.852

        Viscosity at 40°C (104°F) ASTM D445 82.1 mm²/s

        Viscosity at 100°C (212°F) ASTM D445 13.1 mm²/s

        Viscosity Index ASTM D2270 160

        Pour point ASTM D97 -36°C / -32.8°F

        Flash point ASTM D92 250°C / 482°F

        TBN ASTM D2896 8.3 mg KOH/g